华为交换机怎么批量清除接口配置信息

环境：

华为S5735S-S24T4S-A
Software Version V200R019C10SPC500

问题描述：

华为交换机如何批量清除接口配置信息

解决方案：

1、单接口下清除

系统试图下

sysy

[Huawei]clear configuration interface GigabitEthernet 0/0/1（清除0/0/1口配置）

Warning: All configurations of the interface will be cleared, and its state will
be shutdown. Continue? [Y/N] :y

[Huawei]int GigabitEthernet 0/0/1
[Huawei-GigabitEthernet0/0/1]dis this
shutdown
因清除接口下的配置后为shuadown (关闭)状态
[Huawei-GigabitEthernet0/0/1]undo shutdown 开启接口

#
return

接口下

[HW1730s-GigabitEthernet0/0/49]clear configuration this
Warning: All configurations of the interface GigabitEthernet0/0/49 will be cleared, and its state will be shutdown. Continue? [Y/N] :y.
Info: Total 2 command(s) executed, 2 successful, 0 failed.
[HW1730s-GigabitEthernet0/0/49]
May 21 2022 01:27:30 HW1730s DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.56813.5.25.191.3.1 configurations have been changed. The current change number is 19, the change loop count is 0, and the maximum number of records is 4095.
[HW1730s-GigabitEthernet0/0/49]dis th
#
interface GigabitEthernet0/0/49
shutdown
#

2、接口统一清除

先建端口组，将端口批量加入端口组

[HUAWE]port-group 1
[HUAWEI-port-group-1]group-member GigabitEthernet0/0/3 to G0/0/6

在端口组下undo现有配置即可

[HUAWEI-port-group-1]undo p l
[HUAWEI-port-group-1]undo p d